Description

This is a simple module and remote that allows you to turn things on and off remotely with ease. No programming or complicated circuits required. The module requires an input voltage of 12V and the relay can control a load of up to 10 amps. This could be used to control a light in place of a physical switch.

Modes

Learning method: Turn on the power and the indicator light will be on for 3 seconds. After the indicator light is off, press the learning button once. At this time, the indicator light will be on, press the remote control button and the indicator light will go out. The learning is successful.

Code clearing method : Turn on the power and the indicator light will be on for 3 seconds. After it is off, press and hold the learning button and the indicator light will turn on. After 8 seconds, the indicator light will be off and the code clearing will be successful.

Working mode: self-locking/interlocking/jogging, users can choose freely. (Insert cap selection, T is self-locking type, M is inching type, M and T are not inserted as interlocking type)

The meaning of self-locking/interlocking/jogging:

Interlock: Press the corresponding key of the remote control by hand, the corresponding relay is turned on, and then press another remote control key; the relay is turned off.

Non-lock/jog: press the remote control button by hand, the corresponding relay is turned on, and the remote control button is released; the corresponding relay is turned off.

Self-locking: Press the remote control button once to turn on the relay, and press the remote control button again to turn off the relay.

Point T up mode is self-locking, point L up mode is interlocked, if T and L are not connected, it will be jog

Package Contents:

1 x Remote Control Relay Module
1 x Remote Control